Human Resource Manager Assignment Example | Topics and Well Written Essays - 1250 words

Human Resource Manager - Assignment Example pments in the field of Human Resource (HR), the companies emphasised the need of investing sufficient amount of funds in creation of a workforce that will allow it to maintain its edge in the industry (Truss & Gill, 2009). It is generally believed that personnel management and HRM are similar concepts and there is a minor difference between the two. On the other hand, the proponents of HRM are of the viewpoint that the role of HRM has widened by a considerable extent and it covers a wide range of aspects that were overlooked by personnel managers (`Marchington, 2008). Human Resource Management is given its due respect and importance in firms which was not the case usually observed under the role of personnel management. Generally, personnel management is referred to the set of activities that concern the workforce such as staffing, contractual obligations, payroll and various administrative responsibilities; it shows that it was more concerned with managing people as compared to the resources. On the other hand, HRM takes a holistic approach by ensuring that there is a proper fit and alignment between the organisation’s objectives and its long-term performance. In HRM, the employees are given utmost attention so that their goals are aligned with the business objectives; both people and resources are efficiently utilised (Armstrong, 2006). The personnel management is concerned more with meeting day-to-day activities and focuses on meeting the employees’ current needs. Whereas, in HRM, the main focus is on the employees’ long-term needs and providing them the opportunities to develop their skills and competencies so that they can be proactive and handle their responsibilities properly. In personnel management, employees were considered as a cost but in HRM, employees are valued as vital assets of the company (Srivastava, 2010). Since HRM takes into account all the mandatory aspects required by the organisations to enhance their performance in the market and

Implementing EMS Recommendations Essay Example for Free

Implementing EMS Recommendations Essay Introduction After an audit had been performed for Riordan Manufacturing, faults were found in current procedures and solutions created to make them more sustainable. Listed below are some barriers that may occur when implementing Riordan’s new strategies and the necessary steps needed to overcome those barriers. Identified as well are methods currently in place to ensure systematic monitoring of the new sustainable practices that have or will be put in place. Identify Barriers Riordan Manufacturing has to identify the barriers they must overcome to become a sustainable organization. The barriers must be broken into two parts, external and internal barriers (Ruark, 2013). External barriers are those that Riordan must follow because of federal laws, state laws, and local policies. Another external barrier is the suppliers the organization contracts to do additional work whether in the United States or another country. The organization is responsible for those non-sustainable issues that the contractor creates. Internal barriers are the ones that the company creates, but can control. The organization will have to hire Subject Matter Experts (SMEs) that understand the issues, create a plan to overcome those issues, and maintain the progress. The SMEs must have the funding in place to start doing their work. They must communicate their findings and provide solutions to Riordan Manufacturing management. Communication is the largest barrier to overcome. The SMEs must establish a target and conduct a plan. Another internal barrier is change, and people don’t like change. The leadership must work hard to get the employees on board to help with the changes. Creating an  additional department supervised by the SMEs that handles these barriers will make Riordan manufacturing a success. How or why they might occur Barriers occur for many reasons, and some of the reasons they occur is the lack of communication from the management down to the lowest level. Communication must flow up and down to understand the organizations target and intents. The communication flow will allow the employees to understand the policies and procedures that Riordan Manufacturing has put in place. Another reason barriers occur are due to the lack of training that the employees do not receive. Having properly trained employees will assist with the proper flow of communication as well as the process and procedures that Riordan will implement. The cost to Riordan Manufacturing to implement any new sustainable plan will be a short term profit lost for the organization. The last important reason barriers occur is because resources are not in place as well as the SMEs to provide the guidance to become sustainable and maintain sustainability. Consider financial, social, ethical, technical, and practical aspects of business Financial cost, social concerns, and the environment are important aspects to the approach in becoming compliant with any legal requirements. The practical aspects barrier Riordan Manufacturing will encounter will be trying to improve their facilities with new pipes, air vents, and drainage systems. Implementing the new measures will have an impact on the technical barrier in the operations of the facilities to produce a product that can cause delays in production. Ethical and social issues are important to any organization that is trying to create and maintain their Environment Management System (EMS). The organization cannot allow anyone to use products or change manufacturing processes as that will be unethical. Describe methods currently in place or necessary to ensure systematic monitoring of new sustainable practices.   Riordan Manufacturing will implement some of the new processes recommended to deal with the oil, ink and the solvent issue. They will make sure to measure the air quality in the factory, recycle the oil keeping track of how  much oil is been used, and how much solvent is been separated from the water. They have several measures of monitoring the three areas in the different facilities, but will need to improve in reporting and making changes when needed. How are they measured or monitored? Updating the existing reporting process for all the areas and conduct meetings with the leadership, employees and stakeholders to see what the best approach to any situation is. Adding additional measures to analyze any situation will allow Riordan Manufacturing to understand what is working and what is failing. Monitoring the air pollution and pounds of waste in all the Riordan Manufacturing facilities will allow them to keep track in monthly bases to improve sustainability. What happens if a recommended practice is not working as it was intended? Different courses of action (COA) must be completed for any one task. This COA allows the organization to decide on the best approach when dealing with any issue. The COA will outline the process, produces, and cost to the project. This different COA also provides the leadership with the different solutions to one issue. If the COA selected is not working they have other COA for the same situation they can quickly implement to solve any problem. Conclusion Riordan manufacturing will implement new solutions to help make them more sustainable. Of course, Riordan will need to identify their internal and external barriers to overcome, and once found putting strategies in place to overcome and avoid them. One of the biggest barriers is communication. Having a barrier of communication prevents the flow of understanding of policies and procedures as well as the targets and intents put in place by Riordan. Updating the reporting system as well as adding an additional measure to analyze situations, will allow Riordan to see which processes are successful and which ones failed. Failed processes will be dealt with by putting together multiple courses of action so that solutions can easily be switched if one is not working as well as anticipated. Business organizations have an obligation to help sustain and preserve the environment for future generations. Riordan has taken the initiative in  developing strategies that will incorporate sustainable business practices to ensure that the company and the employees leave less of a carbon footprint for future generations. Reference Ruark, C. A. (2013, August 9). Eliminating Barriers to Small Business Sustainability. Retrieved from Triple Pundit: http://www.triplepundit.com/2013/08/eliminating-barriers-small- business-sustainability/

The Ontological Argument Essay -- Philosophy Religion

The Ontological Argument In Anselm's ontological argument he is trying to prove the existence of God, his argument is an argument purely based on the mind and does not require the moral agent to venture into the real of the senses. Ontology is to do with being, or what something is. Anselm's ontological argument concerns existence and whether it is an attribute of God in the same way omnipotence, omniscience and benevolence are believed to be. The argument is an a priori argument. It does not rest on proving God's existence by relying on experimental knowledge but on showing that God must exist logically, or that God's non-existence is illogical. The main idea behind Anselm’s argument is that if I can think X to exist X must exist because it is possible to conceive it. As such the central premise of the ontological argument is: 'God is that than which nothing greater can be conceived' In other words it is better for something to exist in reality that in the mind, or to exist is the best quality something can poss...

What gave rise to urbanisation in the mediterranean Essay -- essays re

â€Å"What gave rise to urbanisation in the Mediterranean region?† What is urbanisation? To ‘urbanise’ is to ‘make (a rural area) more industrialized and urban’ , urban meaning ‘of or living in a city or town’ . Marja C.V. Vink argues that â€Å"The word urbanization was used for the first time in Spain a little more than one hundred years ago† to show the â€Å"quantitative and qualitative growth if cities† . The degree of urbanisation is quite different when comparing towns or cities of antiquity to the modern understanding of an urban centre; however, essentially it is the same process. When talking about the rise of urbanisation in the Mediterranean region 3 main civilisations spring to mind, firstly the Greeks who were inspired by advanced civilisations of the Near East. Secondly, the Etruscans who ruled central Italy from the eighth century to the third century B.C. when the last Etruscan cities fell to Rome. Etruria was bordered to the south by the River Tiber and to the north by the River Arno. City states developed in Etruria in the eighth and seventh centuries B.C., and â€Å"by the last decades of the eighth century B.C. the centres which had undergone the process of urbanization and social diversification had acquired some of the status of cities.† Etruria flourished until the Gauls invaded in the fourth century B.C. From 616-509 Etruscan kings ruled over Rome. Finally, the Romans dating back to 753 B.C. with the founding of Rome by Romulus. Urbanisation is synonymous with cities. It seems impossible to consider a civilisation ‘urbanised’ if it does not have urban centres. So what is an urban centre? And why were these urban centres needed? Looking at what the cities consisted of can help one answer these questions. In Greece the most obvious choice for studying the process of urbanisation is Athens. I have chosen Marzabotto as the example of an urban centre for Etruria and finally, for the Roman Empire I have chosen Rome. These three cities all adapted to the needs of their population and the one thing common to all three is a cult centre. The first urban centres were certainly not Roman, however once urbanised Rome surpassed any of the Greek or former Etruscan cites in terms of monumentalisation. The Neolithic & Dark Age sees the beginning of domestication of plants and livestock, as well as the emergence of weaponry. With cultivation now possible peopl... ...biliography. Andersen, D., Urbanisation in the Mediterranean, 1997, Museum Tusculanum Press, University of Copenhagen. Barker, G., and Rasmussen, T., The Etruscans. 1998, Blackwell Publishers. Boitani, F., et.al. Etruscan Cities. 1973, Cassell and Company, London. Camp, D.M., The Athenian Agora, 1986, London. Easterling, P.E., and Muir, J.V., Greek Religion and Society. 1985, Cambridge. Lassus, J. The Early Christian and Byzantine World, 1967, Paul Hamlyn, London. Owens, E.J., The City in the Greek and Roman World. 1991, Routeledge, London and New York. Rykwert, J., The Idea of a Town. 1999, The MIT Press, London and Cambridge. Tomlinson, R., From Mycenae to Constantinople: The evolution of the Ancient City, 1992, Routeledge, London and New York. Ward-Perkins, J.B., Cities of Ancient Greece and Italy: Planning in Classical Antiquity. 1974, George Braziller, New York. Collins New Pocket English Dictionary, Harper Collins Publishers, 1992 Websites http://projectsx.dartmouth.edu/classics/history/bronze_age/lessons/les/22.html#8 http://www.anistor.co.hol.gr/english/enback/e992.htm http://www.localcolorart.com/encyclopedia/Minoan_civilization/ http://www.cedarland.org/trade.html

Family Background of Edgar Sia Essay

1. * Electronic Controller uses electrical signals and digital algorithms to perform its receptive, comparative and corrective functions. is best suited for applications where large load changes are encountered and/or fast response changes are required. Trerice Electronic Controllers have full auto tuning and PID capabilities, and offer a host of available options, including user selectable inputs and ranges, outputs, setback functions, and alarms. An economical â€Å"on/off† only style is also available for simple control applications. * Electromechanical controller is a type of traffic signal controller. Despite the fact that computerized traffic signal controllers have dominated the world of traffic signal control, electromechanical traffic signal controllers are still in existence. Electromechanical controllers have been in existence for over 60 years, and they are interesting in many ways, such as how they operate, for example. An electromechanical controller is solely operated by electrical relays. Electrical relays are what provide electrical currents to the important parts that are responsible for controlling the indications of a traffic signal that the electromechanical traffic signal controller is wired to * ELECTRICAL CONTROLLER For actuating a number of electrical devices in accordance with control inputs received from a number of control input sources includes a number of optical isolators having inputs coupled to the control input sources. The optical isolators function to electrically isolate each of the control input sources from each other and to provide individual control voltages corresponding to the control inputs received from the control input sources. The outputs of the optical isolators are coupled through a user-actuable matrix switch to the coils of a number of relays which, in turn, control the electrical devices. Through various settings of the matrix switch, various ones of the electrical devices can be actuated in response to control inputs received from particular ones of the control input sources. Electrical isolation is maintained among the control input sources to avoid the development of undesirable feedbacks to the non-actuated control input sources. * Mechanical Controllers combine sensors, logic, and actuators to maintain the performance of components of a machine. Perhaps the best known is the flyball governor for a steam engine. Examples of these devices range from a thermostat that as temperature rises opens a valve to cooling water to speed controllers such the cruise control system in an automobile. The programmable logic controller replaced relays and specialized control mechanisms with a programmable computer. Servomotors that accurately position a shaft in response to an electrical command are the actuators that make robotic systems possible. 2.) * Motor control * PWM controller * DC-DC controller * Switched mode power supply a) SWITCH is an electrical component that can break anelectrical circuit, interrupting the current or diverting it from one conductor to another.[1][2] The most familiar form of switch is a manually operated electromechanicaldevice with one or more sets of electrical contacts, which are connected to external circuits. Each set of contacts can be in one of two states: either â€Å"closed† meaning the contacts are touching and electricity can flow between them, or â€Å"open†, meaning the contacts are separated and the switch is nonconducting. The mechanism actuating the transition between these two states (open or closed) can be either a â€Å"toggle† (flip switch for continuous â€Å"on† or â€Å"off†) or â€Å"momentary† (push-for â€Å"on† or push-for â€Å"off†) type. A switch may be directly manipulated by a human as a control signal to a system, such as a computer keyboard button, or to control power flow in a circuit, such as a light switch. Automatically operated switches can be used to control the motions of machines, for example, to indicate that a garage door has reached its full open position or that a machine tool is in a position to accept another workpiece. Switches may be operated by process variables such as pressure, temperature, flow, current, voltage, and force, acting assensors in a process and used to automatically control a system. For example, a thermostat is a temperature-operated switch used to control a heating process. A switch that is operated by another electrical circuit is called a relay. Large switches may be remotely operated by a motor drive mechanism. Some switches are used to isolate electric power from a system, providing a visible point of isolation that can be padlocked if necessary to prevent accidental operation of a machine during maintenance, or to prevent electric shock. An ideal switch would have no voltage drop when closed, and would have no limits on voltage or current rating. It would have zero rise time and fall time during state changes, and would change state without â€Å"bouncing† between on and off positions. Practical switches fall short of this ideal; they have resistance, limits on the current and voltage they can handle, finite switching time, etc. The ideal switch is often used in circuit analysis as it greatly simplifies the system of equations to be solved, however this can lead to a less accurate solution. Theoretical treatment of the effects of non-ideal properties is required in the design of large networks of switches, as for example used in telephone exchanges. b) RELAY is an electrically operated switch. Many relays use an electromagnet to operate a switching mechanism mechanically, but other operating principles are also used. Relays are used where it is necessary to control a circuit by a low-power signal (with complete electrical isolation between control and controlled circuits), or where several circuits must be controlled by one signal. The first relays were used in long distance telegraph circuits, repeating the signal coming in from one circuit and re-transmitting it to another. Relays were used extensively in telephone exchanges and early computers to perform logical operations. A type of relay that can handle the high power required to directly control an electric motor or other loads is called a contactor. Solid-state relays control power circuits with no moving parts, instead using a semiconductor device to perform switching. Relays with calibrated operating characteristics and sometimes multiple operating coils are used to pro tect electrical circuits from overload or faults; in modern electric power systems these functions are performed by digital instruments still called â€Å"protective relays†. c) COIL is formed when a conductor (usually an insulated solid copper wire) is wound around a core or form to create an inductor or electromagnet. When electricity is passed through a coil, it generates heat. One loop of wire is usually referred to as aturn, and a coil consists of one or more turns. For use in an electronic circuit, electrical connectionterminals called taps are often connected to a coil. Coils are often coated with varnish or wrapped with insulating tape to provide additional insulation and secure them in place. A completed coil assembly with taps is often called a winding. A transformer is an electromagnetic device that has aprimary winding and a secondary winding that transfers energy from one electrical circuit to another by inductive coupling without moving parts. The term tickler coil usually refers to a feedback coil, which is often the third coil placed in relation to a primary coil and secondary coil. A coil tap is a wiring feature found on some electrical transformers, inductors and coil pickups, all of which are sets of wire coils. The coil tap(s) are points in a wire coil where a conductive patch has been exposed (usually on a loop of wire that extends out of the main coil body). As self induction is larger for larger coil diameter the current in a thick wire tries to flow on the inside. The ideal use of copper is achieved by foils. Sometimes this means that a spiral is a better alternative. Multilayer coils have the problem of interlayer capacitance, so when multiple layers are needed the shape needs to be radically changed to a short coil with many layers so that the voltage between consecutive layers is smaller (making them more spiral like).

The Fall of Rome essays

The Fall of Rome essays The fall of the Roman Republic and eventually the fall of the Western Roman empire are both very important events in our worlds history. There were many different events and problems that contributed to the fall of Rome. Economic depression, high taxes, and barbarian domination are all possible causes of the fall of the empire (Smith 201). These problems, along with civil wars, slowly destroyed the Roman Empire. From 264 B.C. to 146 B.C. there were a series of fights between Rome and Carthage known as the Punic Wars. Three different Punic Wars were fought during this time and they caused some major problems for Rome. Farmland was destroyed and farmers had no choice but to move to the cities to find work. The main problem with this was that most jobs were taken by slave labor, so farmers could not find work. Suitable living quarters The first Punic War was for control of Sicily. It lasted from 264 B.C. to 241 B.C. Rome was victorious in this war (World 144). The second Punic War was instigated in 218 B.C. by Hannibal, a Carthaginian general who wanted to avenge Carthages previous loss. Scipio, a Roman general, devised a plan to defeat Hannibal. Scipio attacked Carthage, Hannibals native home. This lured Hannibal back for a final battle in this war. Hannibal was defeated in 202 B.C. at a town called Zuma. Winning this war was a victory for Romes army, but a defeat for small farmers (Roman). This was the most destructive war of the three Punic Wars. This was the time when the most farmland was destroyed. The third Punic War lasted from 149 B.C. to 146 B.C. There was not really any actual fighting during this war. Instead, Rome sought revenge for the damage Carthage had previously caused to Rome. In 146 B.C., Rome burned Carthage and sold its citizens into slavery. Carthage then became the new province of Africa (World 145). Another problem that...

Soft Determinism Explained

Soft Determinism Explained Soft determinism is the view that determinism and free will are compatible. It is thus a form of compatibilism. The term was coined by the American philosopher William James (1842-1910) in his essay â€Å"The Dilemma of Determinism.† Soft determinism consists of two main claims: 1.  Determinism is true.  Every event, including every human action, is causally determined. If you selected vanilla rather than chocolate ice cream last night, you could not have chosen otherwise given your exact circumstances and condition. Someone with enough knowledge of your circumstances and condition would have been able, in principle, to predict what you would choose. 2.  We act freely when we are not constrained or coerced. If my legs are tied, I am not free to run. If I hand over my wallet to a robber who is pointing a gun at my head, I am not acting freely. Another way of putting this is to say that we act freely when we act on our desires. Soft determinism contrasts with both hard determinism and with what is sometimes called metaphysical libertarianism. Hard determinism asserts that determinism is true and denies that we have free will.  Metaphysical libertarianism (not to be confused with the political doctrine of libertarianism) says that determinism is false since when we act freely some part of the process leading up to the action (e.g. our desire, our decision, or our act of will) is not predetermined. The problem soft determinists face is that of explaining how our actions can be both predetermined but free. Most of them do this by insisting that the notion of freedom, or free will, be understood in a particular way.  They reject the idea that free will must involve some strange metaphysical capacity that each of us has–namely, the ability to initiate an event (e.g. our act of will, or our action) which is not itself causally determined. This libertarian concept of freedom is unintelligible, they argue, and at odds with the prevailing scientific picture. What matters to us, they argue, is that we enjoy some degree of control over and responsibility for our actions. And this requirement is met if our actions flow from (are determined by) our decisions, deliberations, desires, and character.   The Main Objection to Soft Determinism The most common objection to soft determinism is that the notion of freedom it holds onto falls short of what most people mean by free will. Suppose I hypnotize you, and while you are under hypnosis I plant certain desires in your mind: e.g. a desire to get yourself a drink when the clock strikes ten. On the stroke of ten, you get up and pour yourself some water. Have you acted freely? If acting freely simply means doing what you want, acting on your desires, then the answer is yes, you acted freely. But most people would see your action as unfree since, in effect, you are being controlled by someone else.   One could make the example still more dramatic by imagining a mad scientist implanting electrodes in your brain and then triggering in you all sorts of desires and decisions which lead you to perform certain actions. In this case, you would be little more than a puppet in someone else’s hands; yet according to the soft determinist notion of freedom, you would be acting freely. A soft determinist might reply that in such a case we would say you are unfree because you are controlled by someone else. But if the desires, decisions, and volitions (acts of will) that govern your actions are really yours, then it is reasonable to say that you are in control, and hence acting freely.  The critic will point out, though, that according to the soft determinist, your desires, decisions, and volitions–in fact, your entire character–are ultimately determined by other factors that are equally outside your control: e.g. your genetic make up, your upbringing, and your environment.  The upshot is still that you do not, ultimately, have any control over or responsibility for your actions. This line of criticism of soft determinism is sometimes referred to as the â€Å"consequence argument.† Soft Determinism in Contemporary Times Many major philosophers including Thomas Hobbes, David Hume, and Voltaire have defended some form of soft determinism. Some version of it is still probably the most popular view of the free will problem among professional philosophers. Leading contemporary soft determinists include P. F. Strawson, Daniel Dennett, and Harry Frankfurt. Although their positions typically fall within the broad lines described above, they offer sophisticated new versions and defenses. Dennett, for instance, in his book Elbow Room, argues that what we call free will is a highly developed ability, that we have refined in the course of evolution, to envisage future possibilities and to avoid those we don’t like. This concept of freedom (being able to avoid undesirable futures) is compatible with determinism, and it’s all we need. Traditional metaphysical notions of free will that are incompatible with determinism, he argues, are not worth saving.

A History of Flag-Burning and Flag Desecration Laws in the U.S.

A History of Flag-Burning and Flag Desecration Laws in the U.S. Flag-burning or desecration isnt unique to the 21st century. It first became an issue in the U.S. after the Civil War. Many felt that the trademark value of the American flag was threatened on at least two fronts in the years immediately following the Civil War: once by the preference of white Southerners for the Confederate flag, and again by the tendency of businesses to use the American flag as a standard advertising logo. Forty-eight states passed laws banning flag desecration to respond to this perceived threat.  Heres a timeline of events. The First U.S. Supreme Court Ruling on Flag Desecration (1907) Most early flag desecration statutes prohibited marking or otherwise defacing a flag design, as well as by using the flag in commercial advertising or showing contempt for the flag in any way. Contempt was taken to mean publicly burning it, trampling on it, spitting on it or otherwise showing a lack of respect for it. The U.S. Supreme Court upheld these statutes as constitutional in  Halter v. Nebraska  in 1907.   The Federal Flag Desecration Law (1968) Congress passed the Federal Flag Desecration Law in  1968 in response to a Central Park event in which peace activists burned American flags in protest against the Vietnam War. The law banned any display of contempt  directed against the flag, but it didnt address the other issues dealt with by the state flag desecration laws. Verbal Disparagement of Flag Is Protected Speech (1969) Civil rights activist Sydney Street burned a flag at a New York intersection in protest against the shooting of civil rights activist James Meredith  in 1968. Street was prosecuted under New Yorks desecration law for defy(ing) the flag. The Court overturned Streets conviction by ruling that verbal disparagement of the flag - one of the reasons for Streets arrest - is protected by the First Amendment, but it didnt directly address the issue of flag-burning. The Supreme Court Rules Against Laws Banning Contempt of the Flag (1972) After a Massachusetts teenager was arrested for wearing a flag patch on the seat of his pants, the Supreme Court ruled that laws that ban contempt of the flag are unconstitutionally vague and that they violate the First Amendments free speech protections. The Peace Sticker Case (1974) The Supreme Court ruled in  Spence v. Washington  that affixing peace sign stickers to a flag is a form of constitutionally-protected speech. Most states revised their flag desecration laws in the late 1970s and early 1980s to meet the standards set in Street, Smith, and Spence. The Supreme Court Strikes Down All Laws Banning Flag Desecration (1984) Gregory Lee Johnson burned a flag in protest against President Ronald Reagans policies outside the Republican National Convention in Dallas in 1984. He was arrested under Texas flag desecration statute. The Supreme Court struck down flag desecration laws in 48 states in its 5-4 Texas v. Johnson  ruling, stating that flag desecration is a constitutionally protected form of free speech. The Flag Protection Act (1989-1990) The U.S. Congress protested the Johnson decision by passing the Flag Protection Act in 1989, a federal version of the already-struck state flag desecration statutes. Thousands of citizens burned flags in protest of the new law, and the Supreme Court affirmed its previous ruling and struck down the federal statute when two protesters were arrested.   The Flag Desecration Amendment (1990 through 2005) Congress made seven attempts to overrule the U.S. Supreme Court from 1990 through 2005 by passing a constitutional amendment  that would make an exception to the First Amendment. This would have allowed the government to ban flag desecration.  When the amendment was first brought up in 1990, it failed to achieve the necessary two-thirds majority in the House. It has consistently passed the House but failed in the Senate since the Republican congressional takeover of 1994.   Quotes Flag Desecration and Laws Justice Robert Jackson  from his  majority opinion  in  West Virginia v. Barnette  (1943), which struck down a law requiring schoolchildren to salute the flag:   The case is made difficult not because the principles of its decision are obscure but because the flag involved is our own ... But freedom to differ is not limited to things that do not matter much. That would be a mere shadow of freedom. The test of its substance is the right to differ as to things that touch the heart of the existing order.If there is any fixed star in our constitutional constellation, it is that no official, high or petty, can prescribe what shall be orthodox in politics, nationalism, religion, or other matters of opinion or force citizens to confess by word or act their faith therein. Justice William J. Brennans  from his 1989  majority opinion in  Texas v. Johnson:   We can imagine no more appropriate response to burning a flag than waving ones own, no better way to counter a flag burners message than by saluting the flag that burns, no surer means of preserving the dignity even of the flag that burned than by - as one witness here did - according its remains a respectful burial. We do not consecrate the flag by punishing its desecration, for in doing so we dilute the freedom that this cherished emblem represents. Justice John Paul Stevens from his dissent in  Texas v. Johnson  (1989):   The ideas of liberty and equality have been an irresistible force in motivating leaders like Patrick Henry,   Susan B. Anthony, and   Abraham Lincoln, schoolteachers like Nathan Hale and Booker T. Washington, the Philippine Scouts who fought at Bataan, and the soldiers who scaled the bluff at Omaha Beach. If those ideas are worth fighting for - and our history demonstrates that they are - it cannot be true that the flag that uniquely symbolizes their power is not itself worthy of protection from unnecessary desecration.

Summary of 3 topics Essay Example | Topics and Well Written Essays - 1500 words

Summary of 3 topics - Essay Example It is supported by the claim of providing the examples and practical elementary facts related to how the established forces and agents of the American automobile industry played their roles in reducing the spectrum and scope of electric car and in return led to its subsequent failure. The cause and claim for developing electric car gained impetus and demand in the early 1990s when people demanded introduction of the new form of automobiles that would not add to the already threatened environment and the constraints that are faced by it. Owing to the public demand and the requirements the director of the movie Chris Paine undertook the investigative strategy and study in bid to expose all the ingredients and factors that did not let it flourish. A certain segment and monopoly has been said to be responsible for the non flourishing of the possible solution to the global oil consumption, global environment threats and other costs and economic considerations and constraints subjected with the usage of the fuel supported automobiles that are largely in place at present. The movie in the form of documentary and given an account of the ground facts that dominate and dictate the terms of the modern day automobile industries as well as the factors that are impeding the growth and introduction of the electric cars. The director of the movie has invested considerable research into the movie with aims of providing the customers with the real objectives and reasons why the technology could not flourish. The documentary made quite a stir with regard to its subject and the message conveyed through it. The directional features and other angles of the good movie making and the essentials required for a movie are fulfilled and based on this the move has won number of awards in terms of the critics and directional specialties. The movie rightly points out to the objects and the leads in the modern day that are obstructing the growth of this technology

Global strategic Management Essay Example | Topics and Well Written Essays - 4000 words

Global strategic Management - Essay Example Due to innovative strategic management and product development, the company has experienced a rapid growth in domestic as well as international market. The company has identified a better and potential opportunities in international markets and hence, it has entered into major markets of Asia, Europe, Middle East etc. In the process of international expansion involves a number of issues relating to multiple macro-economic, specifically due to cultural diversity. Besides, the industry forces of is also prominent for determining the attractiveness of the industry. Industry for packaged gas and chemical manufacturing has a great economic importance as it offers very vital raw materials to other industries. The global gas and chemical manufacturing industry is becoming very competitive with increasing opportunities. However, the overall industry competition is quite attractive as higher availability of consumers comparing to international organisation. To cater the international market A ir product must use its strengths to counter the underlying opportunities. In this process, the foremost task is to identify the multiple factors influencing international business and the major factors are external forces (political, culture, market trend, geographic features etc) and consumer behaviours. Air product must assess these factors for framing proper strategies. However, the core organisational strategy should support international strategy and Air product must develop distinct strategy for each country. To identify the strategic direction for international market, it can use the nine strategic windows. Marketing mix should also be considers the feature of prevailing international market. The glocalisation strategy should be core essence of global strategic management and hence, it should acts as local company in international market with the international standards. To meet short term and specific aims, the functional strategies should focus on understanding the culture of the market and consumers. Moreover, it also needs to comply with legal frameworks to avoid the country related risks. 2. Introduction There have been significant changes in the nature of trade and business activities. The Industrial Revolution of 18th century can be considered as the first occurrence that changed the thought process of the entire world regarding industrialization. People and world economies have realized that industrialization is one of the most crucial tools for bringing economic and social developments within a country. In order to encourage industrialisation, economic policy makers have to take necessary initiatives so that people can use their entrepreneurial and productive skills. Besides, industrialization also requires multiple resources like labour, capital, materials etc and many countries are not self sufficient in this respect. Therefore, the world economies are inter-dependent on each other for their own benefits i.e. domestic market

World Religion Essay Example | Topics and Well Written Essays - 500 words - 2

World Religion - Essay Example For example, when reading the almanac page about Buddhism, we read that its sacred texts provide â€Å"rules of monastic life† and that it practices meditation (â€Å"Major Non-Christian World Religions†). Just by reading this, we will form our own ideas of what mediation and monasticism is from our limited knowledge and understanding of Buddhism. We have to read and learn about the history of Buddha, the meanings and context of his teachings and how they have been influenced through out its history. Also, just by reading a small paragraph that their belief consists of cycle of rebirth and death, we can’t grasp the full understanding of this belief and what it is trying to say (â€Å"Major Non-Christian World Religions†). With such basic and little knowledge we would be unable to even try to compare it to other religions. When we just read these simple summaries, it makes us believe that religions are boiled down to the few listed practices and beliefs. We make the wrong conclusions and tend to misunderstand the true meaning and their teachings. For example, when reading the summary on Islam, it seems like a list of rigid tasks of fasting, giving charity, and strict rules of conduct (â€Å"Major Non-Christian World Religions†). These few words fail to do justice to the vast and rich history of the religion, its founder, practices, and cultural context. We don’t get an idea of how and why it came to be, what influences it had on the people and how it changed and developed history. Also, when we read the basic concepts and practices of any religion we start making assumptions that its followers worldwide do these same few practices that we have read on a page. For example, when one reads that in Judaism, people observe certain dietary restrictions, celebrate specific holidays like Rosh Hashana and adhere to a â€Å"period of fasting and penitence†, we automatically assume that every single

Commercial Law Essay Example | Topics and Well Written Essays - 1500 words - 2

Commercial Law - Essay Example Whenever there is a bridge in the contract, the law provides a remedy for the damages or monetary compensation. Section 14 of the Sales of Good Act 1979 of the UK governs the formation of commercial contracts involving the buying and selling of goods. The act deals with implied terms and presumptions which reflect commercial expectations in the formed contract. It also outlines few compulsory legal rules to be followed in the formation of commercial contracts. Section 14 of the Act specifies the terms of satisfactory quality of goods and the fitness for purpose of goods under sale. According to the section the seller is obligated to offer goods that are fit for the purpose for which they are being sold especially so if the buyer will reasonably depend on the seller’s expertise. According to Austen-Baker (a 125) an offer is made by one party called the offeror. Through the offer, they express their willingness to be bound to the other party. This can be expressed by the offeror through direct conduct, writing or orally. This is accepted by the other party called the offeree. It is only until the offeree communicates an acceptance to the offeror that the contract can become valid. This can be by action, writing or orally. Offers made orally give room for negotiations from the offeree. Alterations can be made or counter offers suitable to the offeree can be given after which a solid binding agreement is made. Atiyah (155) explains that the acceptance must indicate an agreement by the offeree to the terms used in the offer. This means there is already concurrence of wills between the two or more parties. It is better if the acceptance is put into a written form as future evidence against any breaches. This is because existence of agreement in the minds alone cannot be used by courts as evidence incase of breach of contract. The contract will be considered valid when writing, registration and signing has been completed by

What is 'News' Examine critically and discuss how it is constructed Essay

What is 'News' Examine critically and discuss how it is constructed and produced - Essay Example There is furthermore a tendency for news organs to try to vary their content - an excellent example is in the UK where the TV news bulletins, even on days which are dominated by â€Å"bad news† stories, will usually end with a piece of light relief - so much so that popular mythology has it that a certain news-caster was fired when his over-mirthful reaction to one such item was accidentally aired. Newspapers also follow this format - in most countries the â€Å"serious† news being placed at the beginning of a publication, with less serious issues such as TV listings, sports and letters being placed later in the publication. However, the advent of 24 hour TV news stations such as CNN, BBC World and Euronews, along with the massive expansion of the internet, has made significant changes to the ways that media construct their reports. A vast amount of effort is now put into gathering news, and once consequence of this is that news media are no longer able to manage the flow of news as comprehensively as in the past, nor to restrict access to what information the public will become privy to. Throughout history individuals, organizations and governments have sought to control public access to information. In this they have been sometimes aided and sometimes obstructed by the organs of the media which deliver that information. In particular newspapers in many countries have, until recently, tended to follow the guidance, or even censorship, which governments have imposed on them. However, more recently this has become a less followed path for news media. This greater independence appears to spring form several disparate sources. Firstly - the burgeoning of the internet has provided a new and largely unregulated source of news material. Items that mainstream news media might have previously not reported are now in the public domain. To fail to report these would leave the traditional media open to allegations of news manipulation, scorn and

Commercial Law Essay Example | Topics and Well Written Essays - 1500 words - 2

Commercial Law - Essay Example Whenever there is a bridge in the contract, the law provides a remedy for the damages or monetary compensation. Section 14 of the Sales of Good Act 1979 of the UK governs the formation of commercial contracts involving the buying and selling of goods. The act deals with implied terms and presumptions which reflect commercial expectations in the formed contract. It also outlines few compulsory legal rules to be followed in the formation of commercial contracts. Section 14 of the Act specifies the terms of satisfactory quality of goods and the fitness for purpose of goods under sale. According to the section the seller is obligated to offer goods that are fit for the purpose for which they are being sold especially so if the buyer will reasonably depend on the seller’s expertise. According to Austen-Baker (a 125) an offer is made by one party called the offeror. Through the offer, they express their willingness to be bound to the other party. This can be expressed by the offeror through direct conduct, writing or orally. This is accepted by the other party called the offeree. It is only until the offeree communicates an acceptance to the offeror that the contract can become valid. This can be by action, writing or orally. Offers made orally give room for negotiations from the offeree. Alterations can be made or counter offers suitable to the offeree can be given after which a solid binding agreement is made. Atiyah (155) explains that the acceptance must indicate an agreement by the offeree to the terms used in the offer. This means there is already concurrence of wills between the two or more parties. It is better if the acceptance is put into a written form as future evidence against any breaches. This is because existence of agreement in the minds alone cannot be used by courts as evidence incase of breach of contract. The contract will be considered valid when writing, registration and signing has been completed by

Theory of the Derive Essay Example | Topics and Well Written Essays - 1000 words

Theory of the Derive - Essay Example Thus, it quotes from social and city observers about characteristics of derive, such as that of Chombart de Lauwe (1952),who described, â€Å"an urban neighborhood is determined not only by geographical and economic factors, but also by the image that its inhabitants and those of other neighborhoods have of it,† (Debord, 1952, P 5). It then provides the viewer – the derive actor – a thought, interpretation, or meanings. When it comes to nature, many forms of derive may be obtained, and contrasting thoughts and impressions may be formed depending on where or what the viewer may go through. While it is possible to describe a natural environment as â€Å"untouched† by humans, it no longer applies to being â€Å"undisturbed.† Human activities already altered much of nature, touched and untouched. Indirectly, no stones have been left unturned, so to speak. However, this does not limit nor impede nature derive for one who remains optimistic. One sees many aspects of visual representations: line, shape, balance, form, symmetry, asymmetry, volume, color saturation, contrast and unity. In the exploration of line, some of nature’s products are seen with straight, almost straight, and even curvy lines from tree trunks to leaf features. Many are repetitive, forming symmetry and unity. If one goes deeper, one may inspect the bamboo trunk, with fibers of lines, thousands of them per stem. These can be separated and still form lines like the one seen on synthetic fabrics as is they were engineered to be such. Perhaps, they were engineered by higher forms to be such. Bamboos are structural materials, or even materials for fabrics as is. Bamboo Fiber. Source: Wikipedia, 2011. When it comes to shapes, many representations are sky-inspired. There are the sun, moon and stars, with the moon forming several shapes in the span of a month. There are snowflakes, raindrops, even lightning. Mountains are often pyramidal, or triangular, imitated b y human dwellings with their rooftops. There are oblong fishes, and billions of leaves with thousands of variations. Then there are rocks of varieties of spherical shapes, odd and common. The light that emanates from some of these rocks also inspire their own shapes: say a diamond. We will never get enough of flora’s balance and form. Perfect radiances of flower petals, a center with its attractive colors and forms, and shapes, or even volumes of stigma, anther, and filaments that have for thousands of years attracted many derive experiences. It is how they have occupied important roles in human interaction and survival. In fact, even in afterlife. Flowers represent to humans a lot of things, generally positive and celebratory. It melts anger, pain, and sorrow. It unites, welcomes, refreshes, cheers, consoles, applauds. Flowers have performed well and good to the human experience they continue providing derive experiences of immeasurable pleasure until now. Source: http://flo wers-show.com/ But derive is not all about optimist impressions. As mentioned earlier, there are also negative aspects of natural environment derive experiences which had been influenced by human â€Å"‘touch†, whether nature liked it or not. Through greedy consumption, mindless disposal and major economic activities, nature in many aspects of its existence have been negatively affected by humans. Take for example the latest sea oil spill. Take a look at what volume may mean below: (Source:

Filipino Woman in the Biography by Lucy Komisar Essay Example for Free

Filipino Woman in the Biography by Lucy Komisar Essay Literature is any form of expressing human’s simple to complex experiences that blend, combined and applied into words, well-chosen and arranged. It is full of thoughts, feelings, dreams, sorrows, aspirations and grief of human expressions in every harmonious way of expressions. It is a choice, choice of expressing everything without the hesitation from any hindrances. It is just like entering into a voyage, not to find good fortune but to have pleasure and satisfaction. It can be compared to choice of writing. Humans are writing not because of compliance but because they want to express something for the sake of self- satisfaction. They are not reading because they want to learn a lot but because to feel enjoyment while reading. It is not like going abroad for good but because of the experience. Through literature, people confide on to, talk to, rely on and can be the source of every emotion that they have to feel, feelings that distinguishes the level of their personality that evokes their admirations. It is believed that the social and sexual conditions of women essentially embody their nature that the manner they are treated in society is congruent with what they really are. Thus, women’s social environment, can be generally described as subordinate to men, sexually colonized in the system of dominance, submission and denied rights and the basis of sex, historically chattel, basically considered biologically inferior confined to sex and reproduction. For most part of society and across time and space, man dominates the upper level of political, economical and social power while women are rarely or only partially included. The worth of men is generally more valued than that of women and is usually more compensated. Men are typically more valued in themselves as person, a fact often expressed in social customs, rights and laws. In fact, in almost every culture, the tools and conditions necessary for analysis, the means of communications and the forms of legitimating of knowl edge have been jealously and effectively kept from women. Today, Filipino women are no longer confined to the manual task of household chores but their full potentials, talents and innovativeness are explored and utilized. The power of women is such a huge and limitless tool of intellectual resource, a very vital factor behind a nation’s growth and development. Empowering the women at home, in the community, in work, in every aspect of society would mean empowering the other half of every aspects of nation’s human resource. At present, the Filipino women are already leaders in their own rights. They occupy high positions in the society. As they are free, they are also able to participate in social, economic and political activities. They command the respect of men – rights denied to them with the introduction of the Spanish culture in the country. After, nearly four hundred years after the Spaniards conquest of the Philippines, the Filipino woman has come full circle. She is now able to cooperate more effectively with men with the realization of common aspirations—a better world to live in, governed by the principles of justice and good will. Many writers have been supporters of Cory. They have produced books and a journal containing Cory’s life and Lucy Komisar is one of them. Lucy Komisar is a free-lance journalist, whose articles and analysis of foreign affairs have appeared in the wide variety of publications, including the â€Å"New York Times, the Washington Past, the Christian Science Monitor, the San Francisco Chronicle, the Miami Herald, News day and the Toronto Star, among many others. She is the authors of two books; â€Å"Down and Out in the USA: a history of Public Welfare and the New Feminism and has lectured at universities through out the country. She a member of the executive board of PEN, American Center, a past National Vice President of the National Organization for Women (NOW). She reported from the Philippines during the election campaign and peaceful revolution only in 1986 and returned recently to write the biography of Cory Aquino. The book â€Å"Corazon Aquino: the Story of Revolution†, is the first biography essay of Corazon Aquino by Lucy Komisar. The book traces her life from the childhood in the wealthy family in the Philippines, her marriage to Benigno and her life in exile, a dramatic revolution that install her as President. It also describes the evolution of her life as political leader as she began putting a government together and taking on political and economic problems that face her country. A timely and evocative book, Corazon Aquino is moving portrait of a woman who demonstrates a new kind of heroism. Indeed, there is no doubt that Komisar is one of the writers and journalists who believes in the proper rights of women exercised in the society. The researchers believed that the writer, though an American journalist and writer has a big concern in the status of women in the society. Thus, the thorough analysis of Lucy Komisar’s biography â€Å"Corazon Aquino: the Story of Revolution† vividly reflect the personalities of the former president Corazon Aquino and the women’s rights that rarely Filipino women exercised. Theoretical Framework The study is anchored on the general view of women’s right as well as human’s right. According to Legazpi (1998), the 1987 Constitution declares that â€Å"the state shall value the dignity of every person and guarantee full respect for human rights.† Enshrined therein, as a state policy is the recognition of the role of women in nation building and fundamental equality before the law of men and women. Within this framework, guaranteed respect of their personal dignity and human rights and equal treatment in all aspects of life is presented. The Constitutional Acknowledgment of Women’ rights are reiterated in numerous statutory enactments and relating to such subjects as civil relations, family rights and labor conditions. Various internal instruments to which the Philippines are the signatory signify and reinforce the state’s commitments towards upholding these rights. With particular focus on the character of Corazon Aquino as a Filipino woman, the researchers gave much attention on how the former president exercised her rights on every character and how she gained recognition from these characters. Meanwhile, through the application of formalistic approach of literary analysis, the writer’s point of view in his essays such as styles, purpose and theme were studied. Statement of the Problem The study discusses the Character of Corazon Aquino as a Filipino Woman in the biography by Lucy Komisar. Specifically, this study answers the following questions: 1. What are the events that project the character of the First Female President? 2. How does Corazon Aquino show the character as a Filipino Woman in the following personalities: 2.1Wife and Mother, 2.2 Widow, 2.3 Leader? 3. How do the author reveal the character of Corazon Aquino in relation to: 3.1Style, 3.2Purpose, 3.3Theme? 4. What implications of the essays are portrayed to uphold women’s right? Scope and Limitations The study focuses on the Character of Corazon Aquino as a Filipino Woman in the biography by Lucy Komisar. In the study, the researchers gathered the events that project the character of the First Female President. It also analyzes how the late president shows her character as a leader, wife, and widow that makes her a strong and powerful president. The style, purpose and theme are also analyzed The study is significantly devoted to the evaluation, analysis and interpretation of the biography written by Lucy Komisar, â€Å"Corazon Aquino: the Story of Revolution†. Significance of the Study The study on the Character of Corazon Aquino as a Filipino Woman in the biography written by Lucy Komisar, â€Å"Corazon Aquino: the Story of Revolution† is important in providing greater understanding and insights about the social issues in the society. Nevertheless, for those who specialize in English, the study could serve as a literary drill so that they may engage into critical analysis and interpretation and in the process that understand their value and significance. With the dynamism of education, the teaching approaches, instructional materials, references should conform to the changing times of our societal history. In this regard, the study can be used as a reference and instructional materials or tool in teaching the life of Corazon Aquino. For the teachers of literature, the study can help them generate insights on how students will be directed and/ or guided in dealing with and analyzing literary works. Likewise, the study may also enlighten the Filipino women especially of the contemporary times with regards to their rights and their roles as individuals, and as members of the society. For future researchers, the study may help them bring about the techniques, treatment and approaches in analyzing literary works. The study may also be used as a reference in sociology. It may help the readers understand the nature of the Filipino woman and her complexities. Most of all, the study may serve as a significant indication on the life of Corazon Aquino and the Filipino woman that can set a great pattern for the rights of women. Definition of Terms For the purpose of clear and consistency of terms used in the study, the following terms are hereby defined: Character – combination of qualities that distinguishes as individual person. In the research, it refers to the personality of Corazon Aquino as a wife, widow and leader. Civil Law – refers to the body of customs or practices applicable to specific group of community. It is the kind of law that the Corazon government exercise during her term. Concepts – it is the general idea toward a thing of universal specially, an abstract one. These are the ideas about the character of Corazon Aquino as Filipino Woman. Criticism – it is an intelligent appreciation of any work of art. It is the process of studying the literary piece in the present study. Descriptive Research – type of research that requires a detailed analysis of various aspects and phenomena and their interrelationship. It is the kind of research that researchers used in the present study . Historical Research – the systematic collection and evaluation of data to describe explain and thereby understand actions or event that occurred in the past. It is the basis of the researchers to present study, to collect data and references about the life of Cory Aquino. Liberalism – a doctrine of constitutional promulgation that presents liberty and freedom leaned on the consumption that liberty is natural right and that all over are born free. It is the vision of Corazon Aquino to the Filipino women during her presidency. Maidens of Antiquity – they are women who are perceived to play the traditional child hearing and house keeping. It is the kind of Filipino women that Corazon Aquino wants for a change. Silent Dictatorship – this relates to the characteristics of unobtrusive women over the household, personally take care of everything and have the power over all action and decision of a household. It is the relationship of husband and wife. The wife took all the responsibility and household chores while the husband holds the power. Social Liberation – refers to the ideology that women are capable of fuller and more positive involvement in the growth of the society in which they are apart of advocates, the woman should be viewed as valuable human resources of every fact of natural and international life. It is the organizations that builds women as part of the society and play a crucial role. Women are the center of society and highly regarded. Style – the manner of writing or composing piece with passion or elegance. It is the manner on how the author writes the essay in formal form. Personality – excellence or distinction of social and personal traits. It refers to the characteristics of Aquino as a Filipino woman and all women in the society. Purpose – the aim of an essay which is intended to deliver to the reader him/herself. It refers to the goal of the author on how to show the character of Corazon Aquino in the essays. Presidency – the office, dignity, terms, jurisdiction or residence of a President. It is the position Corazon Aquino holds after the EDSA revolution of 1986 over Marcos’ government. Theme – an idea or motive in a work which may be varied or developed. It is the basis of the topic or concept in the present study. CHAPTER II REVIEW OF RELATED LITERATURE AND STUDIES This chapter presents the review of related literature and study of the research. Related Literature Foreign Literature During the time of Roman republic, women are underestimated by men. In the women’s lifetime, they have to obey their husbands as well as their father. Women are to take care of their guardian. Roman women are typically married off by the age of eighteen. After marriage, women cannot claim rights in her husband’s property and can not appeal in court. But the law has changed, wherein woman becomes powerful in terms of rights and can inherit the property whenever their husband dies. Some women in the elite class become powerful because of their richness, power through marriage and their adulterous. (Russel, 1996) Before, women were not allowed to vote, to be part of the public and political life and even going out without covering everything except their eyes. In other countries, they were not allowed to drink alcohol and if they were caught, they would be punished severely or punished to death. Women have played different role in different society and in different times. In matriarchal society, women are more powerful than men. In paternal society, men are everything to women. Women and men have the same right. Men occupy the position as the group leader more often than women, but old women assume such roles. Women are now working industriously and earn money to support their family. They work hard as men, but they do not get some respect and salary as men. Women have been tired and worked hard to gain some rights as men. (www.women @society.htm, 2008) It has been clear over the last half of the century that women have made the great strides and effort to achieve equality in all areas of society. It might be able to shed some lights as to where our society is going in regard to women in elected office. One will surely think that men are the ones against women in politics; in fact, in the beginning, men are the ones who vote before a woman president, before the women can. The same instance holds for the amount of people who believe that women are not suited for politics. The religious and non- religious sects are expecting more liberal views about women in politics as time passes. But people have believed that women have the right to be representatives in politics. The trends that people see bring up the problem in our society. Yes, it is true that men and women, the religious and non religious, all feed that women have place in the politics but still lack in equality as to the number of offices that women hold. In order for a change to be made, women must have the courage and belief that they are just as qualified to be in politics and must be extremely aggressive in their action. ([emailprotected]\html, 2008) Frummer (1981), states that critical essay helps reader understand a subject. To be critical means to be keen in every detail of the research a person is studying. Its Greek root means â€Å"to separate, discern or choose†; thus the critical essay attempts to enhance the reader’s understanding of subjects by analyzing different p arts and interpreting its meaning. It may deal with any subject worthy of serious study like a painting, a film, a social movement. In most writing classes, however, the critical essay assignment focuses in literature although similar procedures are followed in writing other essays. The success of the critical essays depends on another process- the informed reading of another imaginative literature. According to Harmon (1992), the essay is divided into two: the formal essay and the non formal essay. Formal essay is diversified in form, spirit and length. At one extreme, it is represented by brief, serious magazine article and at the other by the scientific and philosophical treatises like books rather than essays. The technique of the formal essay is now practically identical with that of all factual or theoretical prose in which literary effect is secondary. The informal essay, on the other hand, has its beginning in aphoustic and moralistic writing, animated by the infection of the personal, broadened and lightened by a free treatment of human manners, controlled somewhat by the limitations of periodical publications has developed into a recognizable genre, the first purpose which is to entertain. Stanford (1999) suggests that when responding to an essay one should consider its central purpose. An essay may make significant comparisons or contrasts; it may explain the reasons of an occurrence or explore the effects of a particular event or action. Some essays contemplate or speculate on an idea, exploring many possibilities without insisting on one final conclusion; many other essays, in one way or another argue for or against a point of view, a solution to a problem or a new way of thinking about the word. Whatever the essay’s purpose, a reader should look carefully at the writer’s choice of words as well as the way he or she structures both the essay itself and its sentences and paragraph. Local Literature The highly personalized word of action in an impediment to the development of a wider, institutional sphere is based on abstraction such as â€Å"the rule of the law† and â€Å"the common good†. It may be assumed that this has much to do with the central position of the mother in the Filipino household and all the burdens that it entails. This position becomes the ideological pivot that places women apart from men. The purity of women symbolizes the wholeness of the home. As a superego representative, the term â€Å"Mother† remains the primary embodiment of conscience. In extending and symbolizing warmth and goodness, the female as a wife and mother should love, that is forgiving: she should be gentle and compassionate with those who morally depend on her. (Mulder, 1997) According to the Asian Development Bank (2002), the major constraints affecting the sociological status of Filipino women are very often quite separate from the substantive nature of law itself. Even in countries where women’s right are fully guaranteed in law, the actual implementation and protection of those rights are often compromised by a complex system of practices based on historical, cultural, linguistic, religious, political and other traditions. In many cases, the factor giving rise to the discrimination is many deep-rooted and relate to non legal or paralegal issues. During the period of revolution, the aim of Katipunan was to work for the independence of the Philippines. Besides the pursuit of this aim, there was valuable reaching which the manners were strictly required to follow. Respect for womanhood was the moral qualification of an applicant before she could be accepted as a member. The observer of the article referring to woman was strictly demanded during the early days of the association. There were not a few in who was expelled because of failure to live up to teachings of the organizations. (Kintanar, 1996) Among all the domains in which the Fili pino woman participates, it is perhaps in the home where she enjoys the highest status. When women themselves strongly believe that their place is at home, they become household centered. The wife’s work is to be a loving and loyal mate to her husband. She is responsible for keeping the marriage intact by means of her patience, hard work, submissiveness, and virtue. A mother must attend to her children’s needs such as meals, health, clothing, school needs and moral and religious development. She remains a good household manager and puts her own welfare before that of her husband and children. The recent upsurge of interest in advancing the development of women and increasing their participation in community affairs has also resulted in a realization that they can and should become effective partners of men in development endeavors. Women are therefore urge to refrain from confining themselves to the home and household work their social, economic, political and religious endeavors altered to. (Torres, 1995) Cory Aquino has already earned a unique place in t he history. In the world dominated by men in action, she is a rarity by virtue of her sex; in a political world, where man assumed power through the traditional electoral process or violence, she became the nation’s President through circumstances without any known precedent. As a family member, she is a very clear about her likes and dislikes. She has never been neutral. She tries to do it in a nice way but she makes it very clear that, for example, â€Å"I’m sorry, I can’t support you†. As a mother, she has always cooled under pressure. When her husband was arrested, she was upset that she was in perfect control. Her siblings could always look up to her as a source of strength. (Crisostomo, 1986) As a housewife, she never missed a chance with her husband. She stood by the side of her husband and never questioned all his decisions. She never chided him for the troubles he brought into her family. When Ninoy was challenged by Imelda in his prison cell, Cory took his p lace in the campaign. She, who did not have the experience in the political stage, nor entertained much, hope that she would make it. For seven and a half years, she stood outside the gate of his maximum security prison. As the color of her life changed, she followed a few days later, no longer as a housewife but as a widow to lay his body in the grave. The military soldiers took away her husband’s life by shooting him at the back of his head. Before, she was declared as a President, there were lots of consequences she encountered. The chanting done in the computer during the election offered to her just to reject the position and more. Despite of this consequences and offer, she was not dictated by them; instead, she made some moves to fight for what she deserved. (Tica, 2007) As a president, she forced three major tasks: rebuilding democracy, reserving the economy and ending the communists’ insurgency—the longest running of its kinds in the world. Her camp and her military advisers suggested that the inauguration be held inside Camp Crame where they would ensure security. But the civilian activists wanted it before the huge crowd of EDSA to dramatize the fact that she was being installed not by military but by People’s Power. For almost 13 years of Marcos service in the government, the communist turned into a formidable force enjoying the distant admiration of the nation. Everybody wanted Marcos government to lose, but nobody wanted communists to win. Cory Aquino was fortunate. Almost everybody wanted her and they did everything just to place Cory in the position. It made the Filipino people admire the power and bravery of Corazon Aquino. She was the first Filipino woman president who proved to the nation that women could also place in the politics of a society. (Philippine Daily Inquirer, 2003) The essay is the communication from the individual author, as person to the reader. Like fiction, the essay is read rather than heard or seen and for these reasons, the author will typically identify himself as one addressing the audience. Since the essay is read from the printed page, its content is not objectively present. This is also true of fiction. However, the typical essay is thought off by the reader as a communication from the author to itself. (Tan, 1995) According to Ramos (1991), an essay may be of any length, breadth, death, density, color, savor, odor, appearance, volume or uselessness. It is broadened on one side by the hell fire sermon and or the other by geometrical demonstration; and it ranges easily between these extremes of heat and occasionally steals from both of them. The main division into which the essay may be divided, is the personal/ familiar essay a transcript of a personal reaction to some phase or fact of life; the author does not regard life with the cold eyes of the scientific thinker. The second is formal essay a serious and personal. It undertakes to discuss a subject critically and coldly; and though it also reveals the author’s tastes and views, the intimacy between writers and readers hardly exists, for the personality of the former is suppressed. (Roseburg, 1969)

Aspergillus Fumigatus Identification and Molecular Character

Aspergillus Fumigatus Identification and Molecular Character IDENTIFICATION AND MOLECULAR CHARACTERIZATION OF Aspergillus fumigatus FROM SOIL R. V. Shalini, and Dr. K. Amutha ABSTRACT: Soil was collected, serially diluted and pure culture obtained; slant was prepared in potato dextrose agar and maintained throughout the study. Morphological, microscopical and macroscopically identification were carried out on the isolated organism. DNA was isolated from the 24 hour culture, for ITS-PCR amplification. DNA was amplified by mixing the template DNA (50nm) with the polymerase reaction buffer, dNTP mix, primers and Taq. Polymerase chain reaction (PCR) was performed in a total volume of 50Â µL reaction mixture. The PCR product was mixed with loading buffer (8Â µL) containing 0.025% bromophenol blue, 40% w/v sucrose in water and then loaded in 2% agarose gel with 0.1% of ethidium bromide and the amplified product was visualized under a UV trans illuminator for further examination. The PCR products were finally sequenced using the help of an automated DNA sequencer at progen Ltd (Salem, India) and analyzed with the BLAST program provided by the National Center f or Bio-technology information (NCBI) to confirm the fungal species. The current study demonstrates that DNA genome containing 18S rRNA has a high degree of analytical sensitivity and specificity (100%) for the detection of a wide range of fungi. OBJECTIVE: To isolate, identify and characterize Aspergillus fumigatus using molecular biological methods. MATERIALS AND METHODS: The soil was collected from different places, pooled together allowed to be dried at room temperature. The morphology based identification of Aspergillus was done which includes the size, shape, colour, ornamentation of spore and mode of attachment. Unfortunately a lot of difficulties arose for phenotypical identification of this fungus due to its unstable characteristics. Comparatively a DNA sequence-based identification format appeared to be the most promising in terms of its speed, ease, objectivity and reliability for species identification. RESULTS: The preliminary morphology based studies showed the isolated fungi as a species of aspergillus.However after the DNA isolation followed by sequencing it was concluded that the particular species identified as Aspergillus was Aspergillus fumigatus. KEY WORDS: Aspergillus, serial dilution, DNA, Sequenced. INTRODUCTION: The presence of organic matter in the soil affects the quantity and quality of microbes in the soil. The development of micro fungi in the soil is favoured by soils having acidic reaction and aerobic condition which is likely present in the soil. However the amount of degradation in the soil is brought about by the organisms present in the soil. 1The rate at which the organic matter is decomposed is inter related with soil microbes. (Arunachalam et al., 1997). Microorganisms come in various sizes and shapes and is determined by the soil ph., temperature, available moisture, degree of aeration, availability of nutrients in the soil etc. The genus of spore forming fungi is found worldwide out of which Aspergillus is the most dominant species and is ubiquitoes.Out of that 95% is occupied by Aspergillus fumigatus. The other pathogenic forms of Aspergillus species are Aspergillus flavus, Aspergillus niger, Aspergillus nidulans, Aspergillus terreus etc. This fungi exists only in mycelial f orm, and is thermo tolerant capable of growing at temperatures between 15-53Â °c.Being a spore producing fungi the spores gets dispersed by wind in the atmosphere. 2Aspergillus fumigatus is the most common among all the airborne saprophytic fungal pathogens in immune compromised patients mostly in developed countries (Latge, 1999). It is the main pathogenic agent of various diseases caused in humans including invasive pulmonary aspergillosis, aspergilloma and allergic bronchopulmonary aspergillosis (Tomee van der Werf, 2001) – the former is a frequent cause death in immune compromised patients. The possession of different virulent traits gives A. fumigatus the ability to cause these diseases. It is a known fact that other members of the genus Aspergillus are either less pathogenic or non- pathogenic. Identification of the most common and important species remains problematic due to the variability in the phenotypic characters. However a validated and a careful approach of phenotypic classification (taxonomy) together with phylogenetic treatment of DNA sequence data is a prerequisite for a reliable and a rapid identification. In our inve stigation we used the molecular techniques (sequencing) for the reliable identification rather the identification based on their microscopic and few physiological features. MATERIALS METHODS: Collection of soil samples: Soil samples were collected from different places (in and around Chengalpattu). The surface deposits were removed to a depth of about 10 cm and the exposed soil was collected to a depth of 2-3cm. The collected soil samples were stored in zip locked covers stored in refrigerator temperature for further analysis. The collected soil samples were passed through a sieve to remove the stones and other impurities. Isolation of fungi: The glass wares were sterilized in an autoclave to a temperature of 120Â °c for twenty minutes. The chemicals were of analytical grade (Himedia). The method used for the isolation of fungi from soil was serial dilution method. 1 gm of soil was weighed and mixed in 10ml of double distilled sterile water. This was used for preparing serial dilutions. 1 ml of the final dilution (10-6 ) was pipetted into the prepared potato dextrose agar media (PDA) amended with a suitable antibiotic Chloramphenicol (12mg/100ml). The plates were incubated at 30Â °c for about seven days. Fungi that appeared on petriplates were isolated. The isolates were picked up based on apparent dissimilarity of cultural characteristics and purified. The purified isolates were identified according to the genera on the basis of cultural characteristics such as nature of growth, spore colour, and pigment production, and on morphological characteristics of mycelia and fruiting bodies (Domsch etal., 1980; Raper and Fenne ll 1965) and maintained in agar slants for future use3. Isolation of DNA: Genomic DNA was extracted from 24 hour old culture. Measured 100 micro gram of mycelium into a sterile 1.5- micro centrifuge tube. Simultaneously ground 1 microgram of dried (vacuum filter mycelium first) in a mortar and pestle treated with liquid nitrogen 5-6 times. Poured the frozen powder into the Eppendorf tube. Added 660 750 Â µl of lysis buffer and 10 Â µl of B-mercaptor.Vortexed the mixture for a few seconds. And Incubated at 65Â °C for 1 hour. Used a water bath for incubation. Centrifuged at a speed of 3400 rpm for 5 minutes at room temperature and aspirated out the top layer.Transfered the top aqueous layer into a fresh Eppendorf tube discarded the bottom layer. Measured out 700 Â µl of chloroform, isoamyl alcohol (24:1) into Eppendorf tube and adjusted the volume to meet a 1:1 ratio of aqueous phase.Vortexed the mixture for a few seconds. Centrifuged at a speed of 12000 rpm for 10 minutes at room temperature and aspirated out 550 600 Â µl of the top layer. Transfered the top aqueous layer into Eppendorf tube and discarded the bottom layer. Added 0.1volume of 3m potassium acetate and 0.7 volume of isopropanol. Mixed well by inverting the tube not by vortexing.Centrifuged for about 10 minutes and discarded the supernatant. Added 0.5 mL of ice cold ethanol (70% and inverted the tube gently, again it was centrifuged for about 5 minutes in a spinner) finally the pellets were resuspended in 100Â µl of TE buffer (PH-8). After further purification DNA was quantified spectrophotpmetrically and the quality was analyzed in 0.9% agorose gel. Amplification of 18srRNA by PCR: For ITS-PCR amplification, DNA was amplified by mixing the template DNA (50nm) with the polymerase reaction buffer, dNTP mix, primers and Taq polymerase chain reaction (PCR) was performed in a total volume of 50Â µL reaction mixture containing Primer (2Â µM/Â µL) 8.0Â µL 10X Buffer 5.0 Â µL 2mM dNTP Mix 5.0Â µL Taq DNA polymerase (5U/Â µL) 0.5Â µL Template DNA (50ng) 2.0Â µL Sterile distilled water 29.5Â µL Total volume 50.0Â µL PCR amplification condition: Amplification was carried out in a primus advanced gradient thermocycler. The PCR was programmed with an initial denaturing at 94Â °C for 5 min, followed by 30 cycles of denaturation at 94Â °c for 30 seconds, annealing at 61Â °c for 30 seconds, and extension at 70Â °c for 2 minutes and a final extension at 72Â °c for 7 minutes. The PCR product was mixed with loading buffer (8Â µL) containing 0.025% bromophenol blue, 40% w/v sucrose in water and then loaded in 2% agarose gel with 0.1% of ethidium bromide and the amplified product was visualized under a UV trans illuminator for further examination. (Sequencing) Sequencing of ITS region for identification of isolated fungi : Chosen Samples of the genomic DNA containing 18S rRNA were shortlisted for more specific species confirmation by using DNA sequencing. The sequenced PCR product was aligned with other isolate sequences from NCBI genbank for identification. The PCR products were finally sequenced using the help of an automated DNA sequencer at progen Ltd (Salem, India) and analyzed with the BLAST program provided by the National Center for Bio-technology information (NCBI) to confirm the fungal species. RESULTS: Macroscopic and Microscopic Analysis: Analysis of the isolated Aspergillus species showed variation in the colony colours, texture, and reverse side colours (table 1 and 2). The morphological microscopic and molecular characteristics showed that the isolate is Aspergillus fumigatus (details given in table 1and 2). Morphological characters of colony (table1) Characteristics Aspergillus fumigatus Surface colour Margins Reverse side Growth Green to dark green Entire Yellow Rapid Microscopic characteristics (table2) Characteristics Aspergillus fumigatus Hyphae Branched septate Conidiophore Present Vesicle Dome shaped Conidia Present Phialides Uniseriate Fruiting body Cleistothecia Fig A1 Fig A2 Morphological characterization of Aspergillus species on potato dextrose agar A1-Aspergillus fumigatus surface colour, A2-Reverse side of the colony. DNA sequencing of ITS region for identification of species: The species of fungi from the PCR sample was identified by DNA sequencing of the internally transcribed spacer (ITS) region of rRNA gene. Segments of the entire ITS regions, including partial 5.8S rRNA and internal transcribed spacer 2, complete sequence, 28S rRNA,partial sequence were amplified using the primer PGF04 5’-GGC ATC GGC C-3’. Amplification of the ITS region of strain Aspergillus fumigatus had a size of 1703bp. It was submitted to the NCBI and the accession number KC 119199 was received. M 1 2 Fig A3 represent the banding pattern of Aspergillus fumigatus from PCR reactions Lane M= Marker, Lane 1= Aspergillus fumigatus, lane 2=Aspergillus fumigatus. DISCUSSION: Detection of A. fumigatus is of great concern because it is a dangerous allergen associated with aspergillosis 5(Abraca et al., 1994; Schuster et al., 2002; Noonimabcet al.2009; Edwin et al., 2010; Gautam et al., 2011). This highlights the importance of correct identification and taxonomical differentiation between different species of Aspergillus. The taxonomy of Aspergillus has always been complex due to its great number of species (nearly 250), which have very few differences. The identification of different Aspergillus species, on the basis of their morphological characters (example, colony colours, and reverse side) is one of the oldest and most adopted methods. Some of the species of Aspergillus have the same morphological features which make it difficult to distinguish between them it is also a time consuming process and may not be accurate (Klich and Pitt, 1988; Samson et al., 2004)6. This shows that morphological and microscopical characters are not enough for fungal identification and it renders the need of molecular techniques for correct species identification. Molecular characterization on the other hand, is a rapid and a quick procedure which requires minimal handling of pathogens. It also helps in distinguishing morphologically, similar fungal species. Several similar studies on the application of PCR technology were used for the identification and detection of fungi, by using internal transcribed spacer (ITS) were already been studied and published7 by several scientist (Henson and French, 1993; Marek et al., 2003; Haughland et al., 2004; Druzhinina etal., 2005).. Many more such studies were also carried out very recently by God et and Munaut (2010) in the differentiation of Aspergillus flavus, A.parasiticus, A.tamarii and A.nomius by PCR-RAPD markers. Similarly, Leema et al. (2010) confirmed the species A. flavus by verifying; using the molecular methods that is, by amplification of the internally transcribed spacer regions. By using the help of RAPD-PCR, 8Khan et al. (2007) studied diversity in various Aspergillus niger isolates sourc ed from pigeon pea fields .Several molecular techniques have been tested to classify different Aspergillus species like random amplification of polymorphic DNA (RAPD) (Yuan et al., 1995), the internal transcribed spacer (ITS) region (Kumeda and Asao, 1996; Henry et al., 2000; Kumeda and Asao, 2001; Rigo et al., 2002) and the aflatoxin gene cluster (Chang et al., 1995; Watson et al., 1999; Tominaga et al., 2006). In this study care was taken to choose the genomic DNA containing 18sRNA specifics primers that were helpful in amplifying medically important fungi. The genomic DNA containing 18s rRNA was the right candidate for detection of fungus as it is a mutli-copy gene which evolves slowly and is conserved among fungi. The present study proves that the genomic DNA containing 18s rRNA based PCR is suitable for probing large range of medically significant fungi owing to its higher level of analytical sensitivity and specificity. CONCLUSION: In this present study we had shown that molecular techniques are rapid and best for identification of fungi than the traditional morphological methods for early diagnosis and treatment of fungal infections. The goal of our study was to identify a practical, quick, cheap, method for the identification of A. fumigatus, the most common of the Aspergillus pathogens. REFERENCES: Arunachalam K, Arunachalam A, Tripathi RS, Pandey HN. 1997 – Dynamics of microbial population during the gradation phase of a selectively logged subtropical humid forest in north east India. Tropical Ecology 38, 333–341. Sirida Youngchim,1,2 Rachael Morris-Jones,1 Roderick J. Hay3 and Andrew J. Hamilton1 Production of melanin by Aspergillus fumigatus Journal of Medical Microbiology 2004, 53, 175–181. Domsch, K.H.,Gams W. and Anderson T.H. 1980.Compendium of soil fungi, vol 1.IHW-Verlag,Eching.,Raper,K.B.andFennel,D.I.1965.The genus Aspergillus (Baltimore: Williams Wilkins). Ferrer C, Colom F, Frases S, Mulet E, Abad JL, Alio JL:Detection and identification of fungal pathogens by PCR and by ITS2 and 5.8S ribosomal DNA in eye infections. J ClinMicrobiol 2001, 39(8): 2873-2879. Abraca ML, Bragulat G, Cabanes FJ 1994. Ochratoxin A production by strains of Aspergillus flavus var. niger . Appl. Environ. Microbiol. 60:2650-2652. Klich MA, Pitt JI 1988. Differentiation of Aspergillus flavus from Aspergillus parasiticus and other closely related species.Trans. Br.Mycol. Soc.91:99-108. Henson J, French R 1993. The polymerase chain reaction and plant disease diagnosis. Ann. Rev. Phytopathol.31:81-109. Khan MR, Anwer MA, Mohiddin FA 2007. Molecular diversity in Aspergillus isolates collected from pigeonpea field in Aligarh region.Environ. Biol. Conserv. 12:59-64. Godet F, Munaut F 2010. Molecular strategy for identification in Aspergillus section flavi. FEMS Microbiol. Lett. 304:157-168. Leema G, Kaliamurthy J, Geraldine J, Thomas PA 2010. Keratitis due to Aspergillus flavus: Clinical profile, molecular identification of fungal strains and detection of Aflotoxin production.Mol. Vision 6:843-854. Yuan G, Liu C, Chen C 1995. Differentiation of Aspergillus parasiticus from Aspergillus sojae by Random Amplification of Polymorphic DNA. Appl. Environ. Microbiol. 61:2384-2387. Kumeda Y, Asao T 2001. Heteroduplex panel analysis a novel method for genetic identification of Aspergillus section flavi strains. Appl. Environ. Microbiol. 67:4084-4090. Chang PK, Ehrlich KC, Bhatnagar JD, Cleveland TE 1995. Increased expression of Aspergillus parasiticus aflR, encoding a sequence specific DNA-binding protein, relieves nitrate inhibition of aflatoxin biosynthesis. Appl. Environ. Microbiol. 61:2372-2377.

Eulogy for Grandmother :: Eulogies Eulogy

Eulogy for Grandmother When I think of Mary Helen Smith, also known to me as Grandma, I think of learning, laughter and love. Now all of the felicitous times are just a big barrier of memories surrounding my heart. I can remember doing puzzles with my Grandma. The table she'd use came up to my chin when I was first interested in the concept of putting pieces of colorful cardboard together. When we had finished forming all the pieces together, I was in pure fascination of how beautiful the picture was that the pieces had formed. One time my family bought my Grandma a puzzle containing five thousand pieces. She worked on it (which took a lot of time) but eventually finished it. Grandma even made it into her city's newspaper about her puzzle. It made me feel that Grandma was famous. After she was done with it, she glued it together and stored it away underneath my Grandpa's bed. Let me say to you that this puzzle had faces on it of people all over the world. Grandpa really enjoyed having a hundred faces looking at him during the night. "All the world is looking at me," he'd say. Grandma taught me how to swim; she was a lap swimmer. When I grew up my cousins, my sister and I taught her how to do a bomb into the water. I bet she was the only Grandma in the world to do that. Grandma once popped one of my rafts by jumping on it. Remember that, Mom? You popped the other one. Grandma was involved in so many groups, clubs and activities; she was very popular. But it was time for God to take her. I can see her right now: laughing, talking and probably even doing the Charleston with her new and old friends in heaven. Grandma now is in charge of watching out over us. And in spirit she joins us today. Grandma is like a ray of sunshine. She helps light the way. She keeps us warm and comfortable. She cradles us with her warm arms. Grandma gave me so much wisdom; she was the smartest lady I ever knew. She had class and loyalty, courtesy and honor. Grandma beat me in Monopoly every time--her iron got all the good properties. She taught me how to cross stitch. She let my sister and I have a fashion show using all of her clothes and accessories. Eulogy for Grandmother :: Eulogies Eulogy Eulogy for Grandmother When I think of Mary Helen Smith, also known to me as Grandma, I think of learning, laughter and love. Now all of the felicitous times are just a big barrier of memories surrounding my heart. I can remember doing puzzles with my Grandma. The table she'd use came up to my chin when I was first interested in the concept of putting pieces of colorful cardboard together. When we had finished forming all the pieces together, I was in pure fascination of how beautiful the picture was that the pieces had formed. One time my family bought my Grandma a puzzle containing five thousand pieces. She worked on it (which took a lot of time) but eventually finished it. Grandma even made it into her city's newspaper about her puzzle. It made me feel that Grandma was famous. After she was done with it, she glued it together and stored it away underneath my Grandpa's bed. Let me say to you that this puzzle had faces on it of people all over the world. Grandpa really enjoyed having a hundred faces looking at him during the night. "All the world is looking at me," he'd say. Grandma taught me how to swim; she was a lap swimmer. When I grew up my cousins, my sister and I taught her how to do a bomb into the water. I bet she was the only Grandma in the world to do that. Grandma once popped one of my rafts by jumping on it. Remember that, Mom? You popped the other one. Grandma was involved in so many groups, clubs and activities; she was very popular. But it was time for God to take her. I can see her right now: laughing, talking and probably even doing the Charleston with her new and old friends in heaven. Grandma now is in charge of watching out over us. And in spirit she joins us today. Grandma is like a ray of sunshine. She helps light the way. She keeps us warm and comfortable. She cradles us with her warm arms. Grandma gave me so much wisdom; she was the smartest lady I ever knew. She had class and loyalty, courtesy and honor. Grandma beat me in Monopoly every time--her iron got all the good properties. She taught me how to cross stitch. She let my sister and I have a fashion show using all of her clothes and accessories.

American Superiority Essay -- essays research papers

In his series of essays and "letters" on American life, Michel-Guillaume-Jean de Crevecoeur gives his readers numerous examples of the superiority of America to all other countries of that time. He believes that one reason for superiority is that America is with out the aristocracy so prevalent in Europe at the time, which led to a hard working and socially equal society. Another reason Crevecoeur sees America as a superior society is the accepting, and assimilating into one new race, the poor peoples from all European countries. This led to an extraordinarily diverse population, much more diverse than any one of the European countries eight-tenth century. It was for these reasons, as well as many others that Crevecoeur saw America as the greatest nation of the 1700’s. Crevecoeur admires the equality and the freedom of the American people. He sees life without the harsh rule of kings and bishops as much more easy going and pleasing to the general public. The lack of an established aristocracy allows for the rich and the poor to intermingle and exchange ideas in a way never thought before in Europe. The classes were also brought to a single level by the fact that all people in the colonies had to work to survive. The rich and poor alike had to, at first, work their own land to supply food and income to support themselves and their families. This requirement for work led to the American people being very industries and self sufficient, even under adverse conditions....